Motor Configuration

• Drive Current: 2

• Idle Current: 0

• Microsteps: 32

• Max Velocity: 0.66 (520 rpm) [NEMA #23 Max: 530]

• Max Accel: 8.826

• Max Jerk: 50

• Step Angle: 1.8

• Travel / Rev: 1.27mm

Homing

• Stall Microstep: 8

• Search Velocity: 0.66

• Stall Volts: 6

• Stall Sample Time: 50

• Stall Current: 0.2

• Zero Backoff: 5

The Buildbotics controller is configured to use metric (mm) units.

Importing DXF in VCarve Pro

• Import the DXF file from your CAD drawing

• Select all the imported entities and Join Vectors.

• If needed, rescale the drawing by using Set Selected Objects Size in the Transform Objects group, check Link XY, and enter *i= in the Width(X) or Width(Y) at the end of the dimension. It will convert the metric dimensions automatically to inches.

Getting Started

Max Travel: X200mm Y160mm Y160mm

Buildbotics Controller

This machine uses a Buildbotics controller and has a touchscreen and web interface. Toolpaths generated by , MasterCAM, or any other CAM software may be used as long as they are configured properly.

Preflight Check

• Add a few drops of light machine oil to the two oil cups to ensure slides and screws stay lubricated while in use.

Spindle

10,000 RPM Pulley