# Router Zamboni

{% file src="/files/j1ovsIZmFwhHcVSj5XX7" %}

## Instructions

* Make sure router surface is clear. Raise spindle about 6" off the surface.
* Remove endmills.
* Install dust brush attachment.
* Click on **Ref All Home.**
* Zero the X and Y Axis.
* Lower the spindle until dust brush touches the surface then lower another 1/4".
* Zero the Z Axis.
* Run the program.


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://wiki.cherokeemakerspace.org/index/wiki/wood/cnc-router/router-zamboni.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.