Sherline
This page is maintained by Alexander Cua.
This mill is on loan from Alexander Cua. Please reach out to him before using.
Getting Started
Max Travel: X200mm Y160mm Y160mm
Buildbotics Controller
This machine uses a Buildbotics controller and has a touchscreen and web interface. Toolpaths generated by VCarve Pro, MasterCAM, or any other CAM software may be used as long as they are configured properly.
Preflight Check
Add a few drops of light machine oil to the two oil cups to ensure slides and screws stay lubricated while in use.
Spindle
10,000 RPM Pulley
Position
Speed
270°
340 RPM
0°
3300 RPM
90°
6280 RPM
180°
8900 RPM
Last updated
Was this helpful?